Kingwood Area Concrete Cleaning
Concrete Cleaning is an art in itself that only a few can master. We at Kingwood Pressure Washing have taken the time to research and analyze the proper ways to clean concrete so the results last a lot longer than some of the other so called pressure washing companies.
Oil stains and rust stains are two of the hardest elements to remove from concrete. Once they enter the pores of the concrete, it is almost impossible to remove all of the stain completely. With the experience of Kingwood Pressure Washing, we have learned which products work well, and which products do not. Depend on us to remove those stubborn stains instead of wasting all your hard earned money on products that fail to get result you desire.
Concrete cleaning and pressure washing is performed on a daily basis by Kingwood Pressure Washing. We perform this function on concrete mostly by using what we call our “Surface Cleaner”. It is our concrete cleaning machine that can cover a larger area, at a faster rate, and cleans more accurately than using the typical wand or spray gun cleaning. Using a surface cleaner helps us get jobs done quickly and efficiently. Instead of performing driveway cleaning in 3 hours, it takes more like 1 hour.
After performing your concrete and brick cleaning, we spray them with what we call our “Concrete Cleaning Formula”. This is our special formula that will stop any new algae, mold, or moss from forming, acting as a preventative, while also killing off any algae, mold, or mildew that typical pressure washing doesn’t remove. This in turn will keep your concrete clean for a much longer period. We also use this technique for brick pavers, natural stone surfaces, and other paved surfaces.
With a 100% customer satisfaction guarantee, Kingwood Pressure Washing is the company to depend on for all your exterior cleaning needs!
Oil Stained Concrete Cleaning
Oil stains can be quite difficult to remove. “Can you remove these oil stains from my concrete?” Yes, and maybe no. Oil stains are plain and simple tough. It depends on many factors if oil can be removed with basic concrete cleaning. The most important factor is how long the oil has been on the concrete, and was anything put on the stain already.
Long term oil stains are almost impossible to remove completely, since they have had time to set in the pores and dry. Long term oil stains can be removed enough to were only a shadow of the oil stain is visible in most cases. Another question is what type of oil is it? Some oils are capable of being removed easier than others. And finally, how porous is the concrete? With all these factors going into the removal of an oil stain, it is hard to be able to tell someone that concrete cleaning can remove the oil stain completely. We always recommend performing a full driveway cleaning when removing an oil stain, instead of just cleaning the oil stain alone.
Rust Stained Concrete Cleaning
Like oil stains, rust stain removal depend on many factors. What is the rust stain caused by? How porous is the concrete that the stain is located in? With these, and many other factors, we can determine what type of treatment is needed for your rust stains.
Fertilizer rust stains are one of the more difficult to remove completely with concrete cleaning. Granules left on concrete from fertilizing the yard, or leaking from a potted plant can be one of the hardest rust stains out there, but Kingwood Pressure Washing knows the secret. Many times these rust stains cannot be completely removed with normal concrete cleaning, unless you know what chemicals to use. A piece of outdoor furniture that causes rust stains can usually be removed with no problems. Call, or email us today for a free evaluation of your rust.
Fill out the form below to receive a FREE estimate!